Insulated Roof Panels

Wall Panels Roof Panels Installation Accessories Pick-Up / Delivery

For full colour options view "Colour Selection" document

An insulated roof metal panel stands as a revolutionary, multifaceted modular building component, boasting remarkable lightweight properties that not only facilitate ease of installation but also elevate structural integrity. With its innovative design, this panel serves as a comprehensive solution for constructing entire building envelopes. Beyond its foundational role, it excels as an insulation powerhouse, a formidable vapor barrier, an impervious shield against inclement weather, and a sleek finishing touch, harmonizing functionality with aesthetic appeal to redefine the standards of modern construction practices.

Information

Click or tap on images below to get PDF files with full panel specification and / or colour chart.

Panel Profiles

ACTUAL COVERAGE WIDTH: 39.5”
PANEL LENGTHS: 8’ to 40’
THICKNESS: 2” to 8”

Colour Selection

INSTALLATION MANUAL HANDLING MANUAL REQUEST A QUOTE

Specification

MINERAL WOOL FIBRE

ROXUL products are mineral wool fibre insulations made from basalt rock and slag. This combination results in a non-combustible product and a melting point of approx. 2150°F (1177°C), which gives it excellent fire resistant properties. ROXUL mineral wool is a water repellent yet vapour permeable material.

Compliance and Performance:

ASTM E 84 (UL723)

Surface Burning Characteristics:

Flame Spread = 0

Smoke Developed = 5

ASTM E 136

Behavior of Materials at 750°C (1382°F):

Non-Combustible

CAN4 S114

Test for Non-Combustibility:

Non-Combustible

Moisture Resistance:

Moisture Sorption = 0.05%

Dimensional Stability:

ASTM C 356

Linear Shrinkage = 0.19%

Thermal Resistance:

ASTM C 518 (C 177)

R-value/inch @ 75°F = 4.0hr.ft².F/Btu

RSI value/25.4mm @ 24°C = 0.71m²K/W

Corrosion Resistance:

ASTM C 165

Corrosiveness = Passed

ASTM 795***

Stainless Steel Stress Corrosion Specification as per

Test Methods C871 & C692: U.S. Nuclear Regulatory Commission, Reg. Guide#1.36: U.S. Military Spec.’s

MIL-I-24244 (all versions including B and C)

Density:

8.5 lbs/ft³ 136 kg/m³

Compressive Strength:

ASTM C 165 @ 10% 4″ Board: 6.64psi (45.8kPa)

EXPANDED POLYSTERYNE (EPS)

Styrofoam Insulation HD is a moulded expanded polystyrene (EPS) insulation. EPS is a closed cell, rigid foam plastic insulation that does not contain a blowing agent such as HCFC or HFC that provides a temporary increase in thermal resistance.

Meets CAN/ULC-S701, Type 2
Thermal resistance – RSI 0.70/25 mm R-value 4.04/inch
Compressive resistance: 16 psi
Closed cell insulation resists moisture
CCMC 12425-L